Dimethyl carbonate as a novel methylating reagent for fatty acids in analytical pyrolysis

Dimethyl carbonate (DMC) was investigated as a mild, harmless and odorless reagent for pyrolytic methylation of fatty acids. Soybean oil was selected as test material for its high content of (poly)unsaturated fatty acids. Pyrolyses were performed at 500, 700 and 900 degrees C by means of a heated platinum filament pyrolyser on-line and off-line to the GC-MS apparatus. Methyl esters of palmitic, linoleic, oleic and stearic acid were formed as prominent products from off-line pyrolysis of soybean oil in the presence of DMC and zeolite 13X. Fatty acid methyl esters (FAMEs) were not observed at important levels in the absence of zeolite, while on-line Py-GC-MS experiments resulted principally in the formation of free fatty acids and hydrocarbons. The FAME profiles obtained from the DMC/zeolite off-line pyrolysis were compared to those resulting from tetramethylammonium hydroxide (TMAH) thermochemolysis and BF3-methanol procedure. The observed differences between pyrolysis and methanolysis methods were principally attributed to the thermal degradation of unsaturated fatty acids. The effectiveness of the DMC/zeolite pyrolytic methylation was further demonstrated by the analysis of tripalmitine and soybean seeds.     

Self‐Assembly Film of Zeolite Y Nanocrystals Loading Palladium on an Au Electrode for Electrochemical Applications

Nano‐scale zeolite Y crystals were synthesized, and palladium nanoparticles were prepared in the supercage of the zeolite by “ship‐in‐a‐bottle” approach. A novel method to fabricate zeolite‐modified electrode (ZME) loading Pd nanoparticles was developed, in which the zeolite Y loading Pd²⁺ ions was self‐assembled on (3‐mercaptopropyl) trimethoxysilane‐attached Au surface to form the stable and density packed multilayers (SAM‐ZME). The structures of zeolite Y and the SAM‐ZME were investigated by using TEM, XRD and SEM techniques. Pd²⁺ ions in the SAM‐ZME were converted into Pd nanoparticles (Pd_n⁰) by two steps consisting of the electrochemical reduction as well as the succeeding admission and release of CO. The redox couple [Fe(CN)₆]^3?/4? was used to probe the electron‐transfer barrier properties during self‐assembling process. Moreover, the special properties of the SAM‐ZME loading Pd_n⁰ were studied by using cyclic voltammetry and CO‐probe in situ FTIR spectroscopy. The results illustrated that Pd_n⁰ in the SAM‐ZME exhibits higher electrocatalytic activity for oxidation of adsorbed CO than that of ZME prepared in our previous study by zeolite coating method. The present study is of importance in design and preparation of SAM‐ZME, which poccesseses excellent properties for the immobilization of electrocatalysts or biomolecules.     

Monte Carlo simulation of adsorption of binary and quaternary alkane isomers mixtures in zeolites: Effect of pore size and structure

Grand canonical Monte Carlo and configurational bias Monte Carlo techniques were employed to simulate the adsorption of binary mixtures of butane isomers and quaternary mixtures in nine zeolites at 300 K. For binary mixtures the results show there is a critical pore size, which is 10-membered-ring about 5.6 Å. The channel sizes of BEA, ISV, MOR and CFI are larger than this critical pore size, they prefer i-butane than n-butane, whereas TON with smaller channel size than critical pore size prefers n-butane than i-butane, but its selectivity decreases with pressure increasing. MFI, MEL and TER prefer i-butane than n-butane at low pressure, but with pressure increasing, the selectivity is reversed. BOG prefers i-butane than n-butane but the selectivity decreased with pressure increasing. It demonstrates that the adsorption and selectivity are controlled by both pore size and pore structure. The n-butane–i-butane–n-pentane–2-methylbutane quaternary mixtures adsorbed in these nine zeolites were studied, and the results show alkane chain length dependence at low pressure, but the adsorption is controlled by pore size and structure with pressure increasing in all the zeolites except for TON and BOG.     

Transport properties of alkanes through ceramic thin zeolite MFI membranes

Polycrystalline randomly oriented defect free zeolite layers on porous α-Al₂O₃ supports are prepared with a thickness of less than 5 μm by in situ crystallisation of silicalite-1. The flux of alkanes is a function of the sorption and intracrystalline diffusion. In mixtures of strongly and weakly adsorbing gases and a high loadings of the strongly adsorbing molecule in the zeolite poze, the flux of the weakly adsorbing molecule is suppressed by the sorption and the mobility of the strongly adsorbing molecule resulting in pore-blocking effects. The separation of these mixtures is mainly based on the sorption and completely different from the permselectivity. At low loadings of the strongly adsorbing molecules the separation is based on the sorption and the diffusion and is the same as the permselectivity. Separation factors for the isomers of butane (n-butane/isobutane) and hexane (hexane/2,2-dimethylbutane) are respectively high (10) and very high (> 2000) at 200°C. These high separation factors are a strong evidence that the membrane shows selectivity by size-exclusion and that transport in pores larger than the zeolite MFI pores (possible defects, etc) can be neglected.     

Configuration of MFI-type zeolite interacting with the probe molecule P(CH<Subscript>3</Subscript>)<Subscript>3</Subscript> – a theoretical study

With P(CH₃)₃ as the probe molecule adsorbed on titanium silicalite (TS-1) zeolite, the special and important role of T12 site in MFI-type zeolite was clearly elucidated. There are altogether three active sites present in TS-1 zeolite with Ti at the T12 site. Owing to the preferential adsorption of probe molecules on the first Brönsted acidic site, the Ti12 center will probably fail to show Lewis acidity. The ionic [HP(CH₃)₃]⁺ species can be stabilized by the first or second Brönsted acidic site, with the former energetically favored. The latter was formed through the transfer of the ionic [HP(CH₃)₃]⁺ species from the first to the second Brönsted acidic site.     

吡咯-IR法测定铝化β沸石的碱性

The basicities of aluminated zeolites βhave been investigated by FTIR spectra of chemisorbed pyrrole. The NH-stretching frequency of pyrrole adsorbed on the samples shifts towards lower wavenumber as the St/Al ratio is decreased and correlates well with the negative charge on the framework oxygen calculated from the Sanderson electronegativity equalization principle, revealing zeolite β to possess a stronger overall basicity after alumination and, therefore, the alumination to be an effective method to improve the basicity. It is also found that the heterogeneity of basic strength occurs and some stronger basic sites appear after alumination.     

原位合成分子筛膜毛细管色谱柱的研制

吸附型多孔层毛细管柱既耐高温又对气体及烃类异构体有选择性，同时又具有毛细管色谱快速、高效等优点，是解决难分离组分的重要柱型．常用作气一固吸附色谱固定相的有强极性的硅、中极性的氧化铝、非极性的碳质及特殊吸附作用的分子筛．其中分子筛以其独特的吸附作用，在永久性气体和烃类碳数族组成分析中有重要地位．Pruecell和Soulages[1，2]等制备了涂渍型5A和13X型分子筛的毛细管柱，对低碳烃类化合物显示了良好的分离能力，分析柱温较填充柱降低约100℃．邹乃忠等[3～5]也先后制备了分子筛层的毛细管柱用来作直馏汽油的分析．由于通…     

不同分子筛载体对CO加氢产物分布的影响

研究了几种小孔分子筛ＺＳＭ－５，ＨＹ，ＮａＹ及β担载ＺｒＯ２对Ｃ加氢反应的催化作用，并就产物的分布情况与担载ＺｒＯ２的硅铝中孔分子筛进行了对比研究。其中中孔分子筛分别用季铵盐和一级胺为模板剂，在水热条件和常温常压下合成；并用ＢＥＴ，ＸＲＤ，ＳＥＭ等手段表征了它们的孔道和骨架结构。另外，考察了碱金属Ｋ＾２＋，Ｎａ＾２＋对催化剂催化性能的影响。     

On the modification of solid adsorbents with volatile organics II. The role of the layer adsorbed

Summary This paper presents a continuation of our research dedicated to solid-adsorbent surface modification with what are commonly regarded as volatile and easily eluted organic compounds. Two porous adsorbents were used: natural zeolite (clinoptilolite) and alumina, while the adsorbates employed were n-hepatane and benzene. The results show that a simple injection of volatile adsorbate greatly alters the solid surface adsorption properties. The consequences of volatile modifier application are discussed on the grounds of adsorption isotherms determined at 313K. Possible implications to the tailor made adsorbents are outlined as well.Part I, J. Chromatogr.442, 105 (1988)     

Brønsted Acidity and Aluminum Substitution Characteristics of Si(nAi) Sites in Zeolites: A Theoretical MNDO Calculation

The Brønsted acidity of the various Si(nAl) sites present in zeolites is evaluated from proton binding energy and LUMO energy calculated by the semiempirical MNDO quantum chemical method. The two calculated energy values both exhibit a linear correlation with the existing ²⁹Si NMR chemical shift and the IR hydroxyl stretching frequency data. The inter-convertibility between different Si(nAl) sites during an alumination or dealumination process is also evaluated based on the calculated substitution energy. The results indicate that alumination processes are less favorable to occur in zeolites than dealumination processes and the latter is more likely to occur for Si(nAl) clusters that contain the maximum number of aluminum nearest neighbors.